Tech Memos
IPE-TM-300 Vessels
Pressure vessel design — nozzles, internals, vacuum service, ASME Div 2, skirts, reactors, and Schedule A revamps.
- IPE-TM-300-01 — Metric Equivalents for Vessels & TraysWord memo
- IPE-TM-300-02 — Vessel Level Instrument and Level Indicator InstallationWord memo
- IPE-TM-300-03 — Vessel Nozzles, Internals, & AncillariesWord memo
- IPE-TM-300-04 — Vessel Sizing Guidelines Attachments (1)Word memo · 1 attachment
- IPE-TM-300-05 — Vacuum DesignWord memo
- IPE-TM-300-06 — Review of Tray and Packing Vendor DrawingsWord memo
- IPE-TM-300-07 — Use of ASME Sect VIII Div 2 Pressure Vessel DesignWord memo
- IPE-TM-300-08 — Fractionator Internals Mechanical Design SummaryWord memo · 1 attachment
- IPE-TM-300-09 — Design of Drumless Condenser Overhead SystemsWord memo
- IPE-TM-300-10 — Spherical ReactorsWord memo
- IPE-TM-300-11 — Vessel SkirtsWord memo
- IPE-TM-300-12 — Guidelines for Schedule A Revamps of VesselsWord memo · 2 attachments
- IPE-TM-300-14 — Vessel Nozzle ReinforcementWord memo
- IPE-TM-300-15 — Inert Ceramic BallsWord memo
- IPE-TM-300-16 — Small Vessels DesignWord memo
© 2026 Inflection Point Engineering, LLC. All rights reserved. The content of this page — including calculation methods, reference data, written analysis, interactive tools, and source code — is the intellectual property of Inflection Point Engineering, LLC and is protected under applicable copyright, trademark, and trade secret laws. Unauthorized reproduction, redistribution, modification, or derivative use in whole or in part is prohibited without prior written consent.
Disclaimer. This material is provided for informational and educational purposes only and does not constitute professional engineering advice. Calculations, reference data, and methodologies are based on published standards and accepted engineering practice but are not a substitute for engineering judgment, site-specific analysis, or review by a licensed Professional Engineer. Inflection Point Engineering, LLC makes no warranties, express or implied, regarding the accuracy, completeness, or fitness for a particular purpose of any content presented here, and shall not be liable for any direct, indirect, incidental, or consequential damages arising from its use. Users assume all risk associated with applying this content to real-world design, operations, or decisions.
© 2026 Inflection Point Engineering, LLC. All rights reserved.