480 Volt Prefabricated Switchracks Datasheet

IPE Engineering Practice IPE-EP-13-7-1DS

Document number: IPE-EP-13-7-1DS · Section: 13 — Electrical

ENVIRONMENTAL/SERVICE

SYSTEM VOLTS AIC AMPS MOMENTARY

TEMP AND ALTITUDE	PER PRACTICE (PARA. 4.0) OTHER OF MAX.	OF MIN.
	FT. ALT.

SPECIAL CONDITIONS	EXTREME HUMIDITY SALTWATER SPRAY
	BLOWING SAND HYDROGEN SULFIDE BLOWING CATALYST AMMONIA
	BLOWING COKE DUST OTHER

SYSTEM GROUNDING	SOLIDLY GROUNDED UNGROUNDED
	HIGH RESISTANCE GROUNDED	AMPERE

AREA CLASSIFICATION	UNCLASSIFIED
	CLASS DIV	GROUP

MAIN BUS
AMPERE	600 AMP 800 AMP
	1000 AMP 1200 AMP
	OTHER
VOLTAGE	OPERATING VOLTAGE

BRACING AMPERE SYSTEM	42000 AMPS PER PRACTICE (PARA. 5.6.7)
	OTHER

SPLIT BUS	REQUIRED (PARA, 5.2.3.7) NOT REQUIRED

SPLIT LOCATION:

SOURCE ENTRY LOCATIONS:

FUTURE SPACE REQUIRED NOT REQUIRED BUS DRILLING

PROVIDE BUS DRILLING FOR THE FOLLOWING SIZE/QUANTITY FUTURES:

INCOMING SERVICE

TYPE	DIRECT CABLE INCOMING UNIT SUB DIRECT COUPLE CABLE	CB MAIN MCM C/PHASE
	Cu,	AL

BUS DUCT

EQUIPMENT ID	JOB NO.	DOCUMENT NO.	REV.

EQUIPMENT ID	JOB NO.	DOCUMENT NO.	REV.

© 2026 Inflection Point Engineering, LLC. All rights reserved. The content of this page — including calculation methods, reference data, written analysis, interactive tools, and source code — is the intellectual property of Inflection Point Engineering, LLC and is protected under applicable copyright, trademark, and trade secret laws. Unauthorized reproduction, redistribution, modification, or derivative use in whole or in part is prohibited without prior written consent.

Disclaimer. This material is provided for informational and educational purposes only and does not constitute professional engineering advice. Calculations, reference data, and methodologies are based on published standards and accepted engineering practice but are not a substitute for engineering judgment, site-specific analysis, or review by a licensed Professional Engineer. Inflection Point Engineering, LLC makes no warranties, express or implied, regarding the accuracy, completeness, or fitness for a particular purpose of any content presented here, and shall not be liable for any direct, indirect, incidental, or consequential damages arising from its use. Users assume all risk associated with applying this content to real-world design, operations, or decisions.