Section 13 — Electrical
Synchronous Motors Data Sheet
IPE Engineering Practice IPE-EP-13-3-3DS
Document number: IPE-EP-13-3-3DS · Section: 13 — Electrical
| MANUFACTURER’S DATA SHEET (CONT.) | MANUFACTURER’S DATA SHEET (CONT.) | MANUFACTURER’S DATA SHEET (CONT.) | MANUFACTURER’S DATA SHEET (CONT.) | MANUFACTURER’S DATA SHEET (CONT.) |
|---|---|---|---|---|
| MANUFACTURER (NAME) | SHOP ORDER NO. | SHOP ORDER NO. | SHOP ORDER NO. | MANUFACTURER’S REQUISITION NO. |
| STARTING DATA ROTOR WK2 |
||||
| LOCKED ROTOR | CURRENT: AMPS: | CURRENT: AMPS: | CURRENT: AMPS: | POWER FACTOR: % |
| 100% VOLTS | COLD LOCKED ROTOR WITHSTAND: AMPS | COLD LOCKED ROTOR WITHSTAND: AMPS | COLD LOCKED ROTOR WITHSTAND: AMPS | SECONDS |
| HOT LOCKED ROTOR WITHSTAND: AMPS | HOT LOCKED ROTOR WITHSTAND: AMPS | HOT LOCKED ROTOR WITHSTAND: AMPS | SECONDS | |
| 80% VOLTS | COLD LOCKED ROTOR WITHSTAND: AMPS | COLD LOCKED ROTOR WITHSTAND: AMPS | COLD LOCKED ROTOR WITHSTAND: AMPS | SECONDS |
| HOT LOCKED ROTOR WITHSTAND: AMPS | HOT LOCKED ROTOR WITHSTAND: AMPS | HOT LOCKED ROTOR WITHSTAND: AMPS | SECONDS | |
| FULL LOAD TORQUE 100% VOLTS | ||||
| LOCKED ROTOR TORQUE 100% VOLTS | % FLT | % FLT | ||
| PULL-UP TORQUE 100% VOLTS | % FLT | % FLT | ||
| BREAKDOWN TORQUE 100% VOLTS | % FLT | % FLT | ||
| PULL-IN TORQUE 100% VOLTS | % FLT | % FLT | ||
| PULL-OUT TORQUE 100% VOLTS | % FLT | % FLT | ||
© 2026 Inflection Point Engineering, LLC. All rights reserved. The content of this page — including calculation methods, reference data, written analysis, interactive tools, and source code — is the intellectual property of Inflection Point Engineering, LLC and is protected under applicable copyright, trademark, and trade secret laws. Unauthorized reproduction, redistribution, modification, or derivative use in whole or in part is prohibited without prior written consent.
Disclaimer. This material is provided for informational and educational purposes only and does not constitute professional engineering advice. Calculations, reference data, and methodologies are based on published standards and accepted engineering practice but are not a substitute for engineering judgment, site-specific analysis, or review by a licensed Professional Engineer. Inflection Point Engineering, LLC makes no warranties, express or implied, regarding the accuracy, completeness, or fitness for a particular purpose of any content presented here, and shall not be liable for any direct, indirect, incidental, or consequential damages arising from its use. Users assume all risk associated with applying this content to real-world design, operations, or decisions.
© 2026 Inflection Point Engineering, LLC. All rights reserved.