Section 12 — Instruments and Controls

12-1-14DS

IPE Engineering Practice IPE-EP-12-1-14DS

Document number: IPE-EP-12-1-14DS · Section: 12 — Instruments and Controls

SECONDARY INSTRUCTIONS

TAG NUMBER

SERVICE 34. SECONDARY TAG NUMBER

35. PREAMPLIFIER

METER 36. FUNCTION

37. MOUNTING

METER LOCATION 38. POWER SUPPLY

LINE SIZE 39. DISPLAY

END CONNECTIONS 40. SCALE RANGE

BODY RATING 41. OUTPUT RANGE

NORMAL FLOW RANGE AUTO/MAN

ACCURACY

LINEARITY OPTIONS

KFACTOR

EXCITATION 42. TOTALIZER TYPE

MATERIALS: BODY 43. COMPENSATION

SUPPORT 44. PRESENT COUNTER

SHAFT 45. ENCLOSURES CLASS

FLANGES 46. STRAINER SIZE & MESH

ROTOR

BEARINGS: TYPE VENDOR DATA

BEARING MATERIAL

MAX. SPPED 47. MANUFACTURER

MIN. OUTPUT VOLTAGE 48. METER MODEL NO.

PICKOFF TYPE 49. SECONDARY INST. MODEL NO.

ENCLOSURE CLASS 50.

23. 51.

52.

FLUID DATA

FLUID NOTES:

FLOW RATE: MIN. MAX.

NORMAL FLOW

OPERATING PRESSURE

BACK PRESSURE

OPERATING TEMP.: MIN.

MAX .

OPERATING SG

VISCOSITY RANGE

PERCENT SOLIDS & TYPE 33.

© 2026 Inflection Point Engineering, LLC. All rights reserved. The content of this page — including calculation methods, reference data, written analysis, interactive tools, and source code — is the intellectual property of Inflection Point Engineering, LLC and is protected under applicable copyright, trademark, and trade secret laws. Unauthorized reproduction, redistribution, modification, or derivative use in whole or in part is prohibited without prior written consent.

Disclaimer. This material is provided for informational and educational purposes only and does not constitute professional engineering advice. Calculations, reference data, and methodologies are based on published standards and accepted engineering practice but are not a substitute for engineering judgment, site-specific analysis, or review by a licensed Professional Engineer. Inflection Point Engineering, LLC makes no warranties, express or implied, regarding the accuracy, completeness, or fitness for a particular purpose of any content presented here, and shall not be liable for any direct, indirect, incidental, or consequential damages arising from its use. Users assume all risk associated with applying this content to real-world design, operations, or decisions.