Section 2 — Documentation Requirements

Supplemental Requirements for CAD Drawings -

IPE Engineering Practice IPE-EP-2-3-2

Document number: IPE-EP-2-3-2 · Section: 2 — Documentation Requirements

SCOPE

This Practice covers the requirements for IPE standard title block design and drawing layouts.
Any deviation to this Practice must be approved by the procedure described in EP 1–1–3.
A revision bar indicates all changes made to Revision 1.0.

2.0 REFERENCES

The latest edition of the following publications are referred to herein.

STANDARDS AND PUBLICATIONS

DEFINITIONS

Additional Notes - Designations which identify additional attributes of a piping system, see EP 5–1–1.
CAD Supervisor - Inflection Point Engineering, LLC employee responsible for all CAD services and drawings at each plant.
Seed File - AutoCAD parameters set up for default conditions for various drawing types.

GENERAL

This Practice contains a general symbol library and seed files. The symbols have been selected from widely used national and industry standards. If additional symbols are required for a particular project, IPE review and approval by the Owner is required as per EP 1– 1–3, before the new symbols can be added to the symbol library.
The Owner’s symbol library is on the AutoCAD. A diskette can be provided upon request, from the Owner’s Engineer. Copies of the symbol cells are shown in the figures located in the back of this Practice.
Copies of the AutoCAD seed files on diskettes will be furnished by the Owner upon request.
The borders and cut lines are set up in the AutoCAD seed files for the various types and size drawings.
All drawings prepared for the Owner including P&IDs, PFDs, electrical, civil, piping isometrics, plans, maps, etc., drawings shall be shown with the title block.

DRAWING TITLE BLOCKS

Site–specific title blocks have been created as AutoCAD blocks and are part of the symbols library.
The detailed text for title blocks shall be specified by the CAD Supervisor.

6.0 DRAWING TITLE BLOCKS

FIGURE 1

IPE STANDARD TITLE BLOCK

APR BY	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE		INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC
CHK BY	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE		INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC
REV BY	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE		INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC
DESCRIPTION	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE	T.	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC	INFLECTION POINT ENGINEERING, LLC
DESCRIPTION	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE	T.
DESCRIPTION	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE	.
DESCRIPTION	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE		DRAW	DRAW	DATE	SCALE	SUPR. ENGINEER
DATE	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE		N	N	DATE	SCALE	DRAFTING SUPERVISOR
DATE	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE		CHECKED	CHECKED	DATE	SCALE	DRAFTING SUPERVISOR
DATE	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE		AFE NO.	PROJECT NO.	PROJECT NO.	DW G	DW G
REV	DR. DATE CK. DATE PROJ. ENGR DATE PROC. ENGR DATE INSPEC DATE RELIAB ENGR. DATE MAINT. DATE OPER DATE		AFE NO.	PROJECT NO.	PROJECT NO.	DW G	DW G

DIR=PROJECT\ DWG

FIGURE 2

IPE STANDARD TITLE BLOCK - LOOP DRAWINGS

© 2026 Inflection Point Engineering, LLC. All rights reserved. The content of this page — including calculation methods, reference data, written analysis, interactive tools, and source code — is the intellectual property of Inflection Point Engineering, LLC and is protected under applicable copyright, trademark, and trade secret laws. Unauthorized reproduction, redistribution, modification, or derivative use in whole or in part is prohibited without prior written consent.

Disclaimer. This material is provided for informational and educational purposes only and does not constitute professional engineering advice. Calculations, reference data, and methodologies are based on published standards and accepted engineering practice but are not a substitute for engineering judgment, site-specific analysis, or review by a licensed Professional Engineer. Inflection Point Engineering, LLC makes no warranties, express or implied, regarding the accuracy, completeness, or fitness for a particular purpose of any content presented here, and shall not be liable for any direct, indirect, incidental, or consequential damages arising from its use. Users assume all risk associated with applying this content to real-world design, operations, or decisions.