Section 1 — Index and Use

Referenced Source Addresses

IPE Engineering Practice IPE-EP-1-0-3

Document number: IPE-EP-1-0-3 · Section: 1 — Index and Use

REFERENCED SOURCE ADDRESSES

The full names, acronyms, and addresses of technical society and trade association codes, standards and along with other documents which are cited as reference in the IPE Engineering Practices are listed herein.

Abbreviation Organization

AASHTO American Association of State Highway and Transportation Officials 444 N. Capital Street N.W.

Washington, D.C. 20001

ACI American Concrete Institute 22400 W. Seven Mile Road

P.O. Box 19150 Redford Station Detroit, Michigan 48219

(313) 532–2600

AEIC Association of Edison Illuminating Cos.51 East 42nd Street

New York, New York 10017

AFBMA Anti–Friction Bearing Manufacturers Association 1101 Connecticut Avenue N.W

Washington, D.C. 20036

AFNOR Association Francaise de Normalization

Tour Europe CEDEX 7 92080 Paris La Defense Paris, France

(1) 788 1111

(1) 788 1326

(also available through ANSI)

AGA American Gas Association 1515 Wilson Blvd.

Arlington, VA 22209

(703) 841–8400

AGMA American Gear Manufacturers Association 1500 King Street

Alexandria, Virginia 22314

(703) 684–0211

AI Asphalt Institute

Asphalt institute Building College Park, Maryland 20740

AISC American Institute of Steel Construction 400 North Michigan Avenue –8th Floor Chicago, Illinois 60611

(312) 670–2400

AISI American Iron and Steel Institute 1133 15th Street, NW Washington, D.C. 20005

(202) 452–7100

AMCA Air Movement and Control Association 30 W. University Drive

Arlington Heights, Illinois 60004 (708) 394–0150

ANSI American National Standards Institute, Inc.

1430 Broadway

New York, New York 10018 (212) 354–3300

(Case Interpretation Publication available from ASME) (Also American Standards Assoc. (ASA))

API American Petroleum Institute Publications and Distribution Section 1220 L Street Northwest Washington, D.C. 20005

(202) 682–8000

ASCE American Society of Civil Engineers 345 East 45th Street

New York, New York 10017 (212) 705–7496

ASHRAE American Society of Heating, Refrigeration and Air Conditioning Engineers

1791 Tullie Circle, NE Atlanta, Georgia 30329

(404) 636–8400

ASME American Society of Mechanical Engineers 345 East 47th Street

New York, New York 10017 (212) 705–7745

ASNT American Society for Nondestructive Testing 1711 Arlingate Ln.

P.O. Box 28518

Columbus, Ohio 43228–0518

(614) 274–6003

ASTM American Society for Testing and Materials 1916 Race Street

Philadelphia, Pennsylvania 19103

(215) 299–5400

AWPA American Wood–Preservers’ Association Rt. 50 - Shopping Center Road Stevensville, Maryland 21668

(301) 643–4163

AWS American Welding Society 550 Lejeune Road

Miami, Florida 33135

(305) 443–9353

AWWA American Water Works Association 6666 West Ouincy Avenue

Denver, Colorado 80235

(303) 794–7711

BSI British Standards Institution Linford Wood

2 Park Street, London WIA 2BS Milton Keynes MK14 6LE, England 01 – 629 – 9000

(also available through ANSI)

BOCA Building Officials and Code Administrators, Intl.

4051 W. Flossmoor Road

Country Club Hills, IL 60477–5795 (708) 799–2300

CEMA Conveyor Equipment Manufacturers Assn.

932 Hungerford Drive

Suite 36

Rockville, Maryland 20850

(301) 738–2448

CFR Code of Federal Regulations Superintendent of Documents P. O. Box 371954

Pittsburgh, PA 15250–7954

(202) 783–3238

COE Dept. of US Army Corps of Engineers

Waterways Experiment Station Vicksburg, MS 39180–6199

(601) 634–3451

CRSI Concrete Reinforcing Steel Institute 933 N. Plum Grove Road Schaumburg, Illinois 60173

(708) 517–1200

CS (Construction Series Standards) Publications ordered from:

The Asphalt Institute Asphalt Institute Building

College Park, Maryland 20740 (301) 779–9354

CTI Cooling Tower Institute 530 Wells Fargo

P.O. Box 73383 Houston, Texas 77273 (713) 583–4087

DEMA Diesel Engine Manufacturers Association 30200 Detroit Road

Cleveland, Ohio 44145

(216) 899–0010

DIN Deutscher Normenausschuss Beuth Veriag GmbH Burggrafenstrasse 4–7

1 Berlin 30, Germany

(also available through ANSI)

EEMUA Engineering Equipment and Materials Users Association 14 Belgrave Square

London, SWIX 8PS, England 01 – 235 – 5316/7

(OCMA Specifications available from EEMUA)

EIA Electronics Industry Association 20011 Street N.W.

Washington, D.C. 20006

EJMA Expansion Joint Manufacturers Association 25 N. Broadway

Tarrytown, New York 10591 (914) 332–0040

EPA Environmental Protection Agency 401 M Street, SW

Washington, D.C. 20460–0001

(800) 424–4000

FCI Fluid Controls Institute

P. O. Box 9036 Morristown, NJ 07960 (201) 829–0990

FIPS Federal Information Processing Standards Publications Ordered from:

National Technical Information Service

U.S. Department of Commerce

5285 Port Royal Road Springfield, Virginia 22161

(703) 487–4600

FM Factory Mutual Engineering & Research Corp.

1151 Boston–Providence Tpke.

Norwood, MA 02062–0000

(617) 762–4333

IAPMO International Association of Plumbing and Mechanical Officials 20001 Walnut Drive, South

Walnut, CA 91789

(714) 595–8449

IBN Institute Belge de Normalization Avenue de La Brabanconne, 29 B–1040 Bruxelles, Belgium

(02) 734 92 05

(also available through ANSI)

ICBO International Conference of Building Officials 5360 South Workman Mill Rd.

Whittier, California 90601

(213) 699–0541

(Uniform Building Code available from ICBO)

IEC International Electrotechnical Commission 3 Rue de Varembe

1211 Geneva 20, Switzerland

22 – 340150

(also available through ANSI)

IEEE Institute of Electrical and Electronics Engineers, Inc.

45 East 47th Street New York, N.Y. 10017 (201) 981–0060

ICEA Insulated Cable Engineers Association

P.O. Box P

South Yarmouth, Massachusetts 02664 (508) 394–4424

(available through NEMA)

ISA Instrument Society of America 67 T.W. Alexander Drive

P.O. Box 12277

Research Triangle Park, North Carolina 27709 (919) 549–8411

ISO International Organization for Standardization Publications available from National Standards 1 Rue de Varembi

Case Postale 56

CH 1121 Geneva 20, Switzerland Organizations (ANSI, BSI, JIS, DIN, etc.) 22 - 341240

JIS Japanese Standards Association 4–1–24, Akasaka

Minato–ku, Tokyo, Japan 107 81–3–583–8001

(also available through ANSI)

MBMA Metal Building Manufacturing Association Thomas Associations, Inc.

1230 Keith Building

Cleveland, OH 44115

(216) 241–7333

MIL STD (Military Standard) Commanding Officer

Naval Publications and Forms Center 5801 Tabor Avenue

Philadelphia, Pennsylvania 19120

(215) 697–2000

MPTA Mechanical Power Transmission Association 3451 Church Street

Evanston, Illinois 60203

MSS Manufacturers Standardization Society of the Valve and Fittings Industry 127 Park Street N.E.

Vienna, Virginia 22180

(703) 281–6613

NACE National Association of Corrosion Engineers Publications Dept

1440 South Creek Drive Houston, Texas 77084

(713) 492–0535

NAPCA National Association of Pipe Coating Applicators Commercial National Bank Building, 8th Floor 333 Texas Street

Shreveport, LA 71101–3673

(318) 227–2769

NAVFAC Naval Publications & Forms Center

5801 Tabor Avenue 10013

(212) 962–4522

PFI Pipe Fabrication Institute

P. O. Box 173 Springdale, PA 15144 (412) 274–4722

PPI Plastics Pipe Institute

A Division of the Society of the Plastics Industry, Inc. 335 Lexington Avenue

New York, New York 10017 (212) 351–5420

PS Voluntary Product Standard (United States Department of Commerce) Superintendent of Documents

U.S. Government Printing Office Washington, D.C. 20402

(202) 783–3238

RIS Redwood Inspection Service 1 Lombard Street

San Francisco, California 94111

RMA Rubber Manufacturers Association

1400 K Street N.W. – 9th Floor Washington, D.C. 20005

(202) 682–1338

SAMA Scientific Apparatus Makers Association 1101 16th Street N.W.

Washington, D.C. 20036

SBCCI Southern Building Code Congress, Intl.

900 Montclair Road

Birmingham, AL 35213

(205) 591–1853

SIS Sveriges Standardiseringskommission Box 3295

Stockholm 3, Sweden

(Request Adjunct No. 12–422000–00) 46–8–613–5200

SSPC Steel Structures Painting Council 4400 Fifth Avenue

Pittsburgh, Pennsylvania 15213

(412) 268–3327

TEMA Tubular Exchanger Manufacturers Association 25 North Broadway

Tarrytown, New York 10591 (914) 332–0040

UL Underwriters Laboratories, Inc.

Publications Stock 333 Pfingsten Road

Northbrook, Illinois 60062

(708) 272–8800

UNI Ente Nazionale Italiano Di Unificazione Piazza Armando Diaz 2,

20123 Milano, Italy

(02) 876914

(02) 800548

(also available through ANSI)

USDI United States Department of the Interior Bureau of Reclamation

Superintendent of Documents

U.S. Government Printing Office Washington, D.C. 20402

(202) 783–3238

VDE Verband Deutscher Elektrotechniker VDE - VERLAG, GmbH

66000 Frankfurt / Main 70,

Stresemannallee 21 Germany

(0611) 6308–1

(also available through ANSI)

• ANSI. Documents listed in the IPE Engineering Practices that are identified by the sponsor’s designation preceded by the organization’s acronym and ANSI are also available from ANSI (example, ANSI/AWWA C 106). In most cases, such documents are also available from National Standards Organizations (BSI, DIN, JIS, etc.).

© 2026 Inflection Point Engineering, LLC. All rights reserved.