IPE-TM-700

Module from the Technical Memo Compendium curriculum.

Module 9 - IPE-TM-700 Metallurgy (7 memos) · Learning Objectives · 1. Apply trend curves for hydrogen + H2S corrosion rates per IPE-TM-700-01 · 2. Apply Inflection Point Engineering engineering standard practice metallurgy per IPE-TM-700-02 · 3. Specify mill scale removal per IPE-TM-700-03 · 4. Apply killed CS and PWHT rules per IPE-TM-700-04 · 5. Apply wet H2S and MSD guidelines per IPE-TM-700-06/07 · Memo Index

Memo #	Title	Key Topic	Audience	Related	Notes
700-01	Trend Curves Corrosion Rates H2S	H2S corr rates + attach	Metallurgy	Materials + Corrosion	Couper/Gorman
700-02	Eng Standard Practice Metallurgy	Material selection core	Metallurgy	Materials	API 941 + NACE
700-03	Mill Scale Removal	Surface prep	Fab + Inspection	Inspection	Pickling / blasting
700-04	Killed Carbon Steel & Post Weld Heat Treatment	PWHT + Si	Metallurgy + Fab	Materials	Sour
700-05	Protection of Austenitic Stainless Steel	Chloride + 300 SS	Metallurgy	Materials	Insulation contamination
700-06	Wet H2S Guidelines	SOHIC/HIC/SSC limits	Metallurgy	Materials	NACE MR0175
700-07	MSD Guidelines	Material Selection Diagram	Metallurgy	Materials + Design	Service/alloy chart

Source: Tech_Memo_Compendium_Curriculum_v1.xlsx · Sheet: IPE-TM-700

© 2026 Inflection Point Engineering, LLC. All rights reserved. The content of this page — including calculation methods, reference data, written analysis, interactive tools, and source code — is the intellectual property of Inflection Point Engineering, LLC and is protected under applicable copyright, trademark, and trade secret laws. Unauthorized reproduction, redistribution, modification, or derivative use in whole or in part is prohibited without prior written consent.

Disclaimer. This material is provided for informational and educational purposes only and does not constitute professional engineering advice. Calculations, reference data, and methodologies are based on published standards and accepted engineering practice but are not a substitute for engineering judgment, site-specific analysis, or review by a licensed Professional Engineer. Inflection Point Engineering, LLC makes no warranties, express or implied, regarding the accuracy, completeness, or fitness for a particular purpose of any content presented here, and shall not be liable for any direct, indirect, incidental, or consequential damages arising from its use. Users assume all risk associated with applying this content to real-world design, operations, or decisions.