Calculators
Bolted-fault current estimate at a transformer secondary using the per-unit method (utility + transformer), plus a simplified IEEE 1584 incident-energy screen and an NFPA 70E PPE category lookup. For screening use only — never a substitute for a formal short-circuit / arc-flash study.
Standards: IEEE 1584-2018 (arc-flash hazard calculations), NFPA 70E-2024 (electrical safety in the workplace), IEEE 141 (Red Book), IEEE 242 (Buff Book). Method: per-unit method for short circuit (infinite-bus conservative); IEEE 1584-2002 simplified empirical formula for incident energy — does not implement the full 2018 IEEE 1584 model. For any real arc-flash study use SKM, ETAP, or EasyPower.
© 2026 Inflection Point Engineering, LLC. All rights reserved. The content of this page — including calculation methods, reference data, written analysis, interactive tools, and source code — is the intellectual property of Inflection Point Engineering, LLC and is protected under applicable copyright, trademark, and trade secret laws. Unauthorized reproduction, redistribution, modification, or derivative use in whole or in part is prohibited without prior written consent.
Disclaimer. This material is provided for informational and educational purposes only and does not constitute professional engineering advice. Calculations, reference data, and methodologies are based on published standards and accepted engineering practice but are not a substitute for engineering judgment, site-specific analysis, or review by a licensed Professional Engineer. Inflection Point Engineering, LLC makes no warranties, express or implied, regarding the accuracy, completeness, or fitness for a particular purpose of any content presented here, and shall not be liable for any direct, indirect, incidental, or consequential damages arising from its use. Users assume all risk associated with applying this content to real-world design, operations, or decisions.
© 2026 Inflection Point Engineering, LLC. All rights reserved.